Static mixer is an efficient pipeline mixing equipment without power components. It is widely used in liquid-liquid, liquid-gas, liquid-solid, gas-gas mixing, emulsification, neutralization, extraction, reaction and enhanced heat transfer processes. Can be applied in a wide range of fluid viscosity (about 106mPa.s) under different flow patterns (laminar, transitional, turbulent, completely turbulent). It can be operated intermittently or continuously, and it is easy Zoom in directly.
Static mixer is an efficient pipeline mixing equipment without power components, which is widely used in liquid-liquid, liquid-gas, liquid-solid, gas-gas mixing, emulsification, neutralization, extraction, reaction
It can be used in processes such as heat treatment and enhanced heat transfer. It can be in a wide range of fluid viscosity (about 106mPa.s) and in different flow patterns (laminar, transitional, turbulent, completely turbulent).
Stream) applications, both intermittent and continuous operation, and easy to directly zoom in.
The static mixer produced by our company is designed and manufactured according to the "JB / T 7660-1995 Static Mixer" standard.
Static mixer is suitable for pipelines with a nominal diameter DN of 10 ~ 1000mm and a nominal pressure of PN of 0.25, 0.6, 1.0, 1.6, 2.5, 4.0, 6.4, 10.0, 16.0MPa.
Please contact our technical department for other specifications.
Model and mark
Static Mixer (S)
Component structure V \ K \ X \ L \ H
Hydraulic diameter d (mm)
Nominal diameter DN (mm)
Nominal pressure PN (MPa)
Mixer length L (mm)
See flange for details of flange and pipe material
Example: SX-25 / 100-1.6-1000BF②
S is the static mixer, X is the element structure, the hydraulic diameter is 25mm, the nominal diameter is 100mm, the nominal pressure is 16kgf / cm2, and the mixer length is 1000mm. Flange,
The pipe is made of stainless steel with jacket.
① The specific letters of the flange and pipe material represent the classification:
B stainless steel (1Cr18Ni9Ti), etc.
A low carbon steel
N acid and alkali resistant glass steel
J rigid polyvinyl chloride
S PTFE liner
② The mixer needs a jacket, and F can be added after the model.
Suitable for liquid-liquid, liquid-gas, gas-gas mixing, emulsification, reaction, absorption, extraction, and enhanced heat transfer processes with viscosity ≤ 102mPa.s. d≤3.5, suitable for lubricating oil filter
For cleaning media; d≥5, application media may be accompanied by a small amount of non-sticky impurities.
Gasoline, diesel, oil blending, salt water neutralization, acid-base neutralization, gas mixing.
Previous: SK type static mixer
下一条: SX type static mixer