Brush-type self-cleaning filters are our indispensable purification equipment, and they are also good assistants for maintaining the environment. Brush-type self-cleaning filters are also commonly used in industrial consumption. However, no matter what kind of equipment, if we want to make the equipment more durable, we need to adopt effective measures to stop home care, for example: regular maintenance, periodic cleaning, periodic inspection and other measures. Today, I will share with you how to brush self-cleaning filters to cultivate talents and extend the service life of equipment.
The most important part for filtering is the filter chip, which is usually made of stainless steel. The filter chip of this material often shows the accumulation of impurities after being used for a period of time, which will affect the working efficiency of the device overnight. At this time, we must do a good job of cleaning in a timely manner. We only need to clean the impurities on the chip. In addition, we must regularly check whether the chip is damaged. If it is found that the filter is damaged, we must stop changing it in time to prevent unnecessary problems.
In addition, it is also necessary to pay attention to the pressure of the device. When the device's eyes decrease, the flow rate will slowly decrease, and the filtering effect will decrease. When encountering such a situation, the filter is intentionally reminding us to pay attention to cleaning and nurturing. When the filter stops cleaning, first put the replaced filter outdoors to blow the ash clean, then use the laundry tub to add water to soak, and scrub it quietly. The cleaned filter should also be air-dried in the center of the vent until the filter is cleaned. Before the filter is installed, it should be checked for damage and air leakage in time, and the device can be stopped only after there is no problem.